Mold Removal in Centuria, WI Wisconsin 54824

Do you require an Licensed Mold Removal Company ASAP?

Call 1-888-217-6019 now.

Assistance from a professional is only a call away.

Simple Signs That You Could have a Mold Issue

  1. The smell of mold is quite distinctive. It's a unique smell. Even if you can't see anything, you still know that it's there.
  2. Visual Microbial Growth. Dark splotches on the ceiling, walls floors or baseboards. Spots across the ceiling may indicate a leaking roof, burst pipe, or condensation in ductwork. Dark patches or brown or black mold in the walls may indicate a cracked or burst pipe behind the wall. It may be a slow leak, but the damage can only become worse.
  3. soft moist spots on the Floors, Walls or Ceiling. This might indicate that there is microbial growth is present. The mold may not be visible at this point however it may be behind the drywall or on the support studs, underneath the flooring, or in the ceiling of your home.
  4. Sudden Unexplained illness. A constant cough, headache and nausea or being sick only in home or in certain areas. These symptoms that persist may be a sign that mold may be present. The 4 groups most susceptible to mold-related illnesses are:
    • Children
    • Older people
    • Immune-compromised
    • Women who are pregnant
  5. Recently water Event. The spores need water to grow and, therefore, a recent water leak or flood, or sewer back-up may have caused the proper water activity to support mold growth.
If you spot any of these signs, call now for a comprehensive mold inspection. Certified and comprehensive testing will be available. If you have a problem, professionals can find it and solve it.

Superior Mold Removal

Fast, reliable mold removal services for a cleaner home and a healthier family. Certified experts, advanced equipment, and professional results. Call today!

Phone: 1-888-217-6019

FEATURED
Professional mold removal firms are equipped with the equipment, staff with the right education and knowledge to tackle mold problems from the beginning to the end. They can pinpoint your problem, determine the best plan of course of action and start right away. Trained and certified technicians can provide the services needed to make your home safe and secure for your family again. Professional mold removal services typically consist of:

Water:

  • Restoration of Water Damage
  • Water Extraction
  • Flood Damage Repair
  • Dehumidification

Mold:

  • Certified Mold Inspections
  • Mold Damage Remediation
  • Air Quality Testing

Areas Served:

Mold remediation services are usually available in various locations, including but not limited to the location as well as its immediate areas, and the region beyond.

Contact Mold Removal Experts 24 hours a day, 7 days a week.

Contact for immediate assistance! 1-888-217-6019

Proudly Serving location

A complete array of services that include water damage restoration, inspection, and mold removal is readily available. Call today for a comprehensive mold inspection in your home or business. An indoor Environmental Professional (IEP) can evaluate the type and level of pollution in your property and assist you to restore it to an healthy condition.

The typical 10 Step Process for Mold Remediation

  1. Find the Source. Determine the root of the water intrusion. The source must be identified and remedied in order to prevent the water intrusion to from occurring again.
  2. A visible inspection of the The Water Damage. Expert technicians inspect for visible Microbial growth and look in places that might be missed.
  3. Diagnostic Testing. Specialized equipment can "sniff out" invisible mold which may be hiding in the walls, stud framing and drywall. Mold testing meters ensure thorough testing for. If necessary, air sample tests can be conducted by an certified mold assessor or Indoor Environmental Professional (IEP). The IEP collects samples and tests every suspected room. Each mold is not the exact same and the appropriate tests can distinguish dangerous mold from just nuisance mold.
  4. Establish Containment. Protecting the household and the rest of the home against the airborne mold spores by creating containment. This provides an safe area to allow removal work to begin. The type of containment used will vary depending on the area of contamination:
    • Source: small areas of contamination less then 10 square. ft. Bagged and removed.
    • Local is one room that is able to be sealed off and remediated, usually 10 sq. feet. up to 100 sq. ft.
    • Full containment areas which require the use of a temporary containment barriers to prevent cross-contamination. The barrier is used to isolate the entire area or multiple rooms.
  5. Air Filtration. The installation of portable air filtration units that purify the air and improve air quality in the home. The protection of the family from the spread of airborne pathogens is achieved through the establishment of negative air pressures between the contaminated area and the rest of the home.
  6. Remove the Mold. Behind safety barriers, the technicians start to remove materials impacted by mold. This may include baseboards, drywall, cabinets, sinks or counters, and flooring in the kitchen. Removal of drywall from ceilings or insulation may be necessary when the roof leak was involved. It may require removing tubs or fixtures in the bathroom, if it has been able to penetrate the walls due to leaking pipes. Professionally trained technicians are meticulous in keeping what is saved while taking care to ensure removal of all evidence of mold.
  7. Treatment for Mold. After damaged materials are removed, professional grade treatment and removal products are applied, following IICRC guidelines. The rest of the surfaces are cleaned and treated.
  8. Air Purification. After removal and treatment complete, the treatment and removal finished, air purification is performed for several days.
  9. Post-Remediation Air Sample Testing. After the air purification protocol is complete after the air purification protocol is completed, post-remediation air sample testing is conducted and must be awarded an A+ grade through the IEP.
  10. Equipment Removal. Once post-remediation testing is completed and air tests are deemed acceptable by an certified mold assessor or IEP, containment barriers and equipment are removed. This leaves a clean palette for bringing in contractors to replace walls or flooring or redesign the kitchen or bathroom as required.

What to Look for When hiring a Mold Remediation Company

  • The Right Price A reputable mold removal companies will never be charged for work that is not needed. They carefully inspect homes and suggest the actions necessary to return the home to the healthy condition. Be cautious of firms that could inflate prices or bill you for pad costs.
  • The Right Ethics Look for well-respected companies in the "location" and surrounding areas. They should offer fair prices and only recommend work that is absolutely necessary for you to restore your home and ensure family safety. Trustworthy companies guarantee their work 100%.
  • The Right Time NOW! If you notice mold and you're concerned about it, you'll want it removed quickly. Call for someone to start the drying process and determine the root of the issue, and begin testing to determine how to fix the problem.
  • The Best Practices Ensure that the mold removal company uses safe methods to protect your family. For instance, safe methods like HEPA vacuuming for dust and spore control are always preferable over misting, which can bring more moisture into the space.
  • The Right Credentials Find technicians certified in WRT (Water Restoration Technician), ASD (Applied Structural Drying), and AMRT (Applied Microbial Remediation Technician).
  • The Right Team Professional teams work according to the highest standards every day. From the beginning of the phone call up to the post-remediation inspection, they should treat every client as family and every home in the same way as it is their own.
 

We're Here To Help!

Phone us now: 1-888-217-6019

 
Updated February 18, 2025