Mold Removal in Stony Brook, NY New York 11790

Do you require an Licensed Mold Removal Company ASAP?

Call 1-888-217-6019 now.

Expert assistance is just one call away.

Simple Indicators That You Might have a Mold Issue

  1. A sour smell. It's a unique smell. Even if you don't discern anything, you know it's there.
  2. Visible Microbial Growth. Dark splotches on the walls, ceiling, floors, or baseboards. Spots on the ceiling may be a sign of a leaky roof or burst pipe or condensation in the ductwork. Dark spots or the appearance of brown or black mold that are visible on the walls may be a sign of a cracked or burst pipe that is hidden behind the wall. It may be a slow leak, but the damage is likely to increase.
  3. soft moist spots on the Floors, Walls or Ceiling. This could be a sign that there is microbial growth may be present. The mold may have not been visible at this point, but it could be hidden behind the drywall or on the supportive studs, under floors, or in the attic of your home.
  4. Sudden Unexplained health issue. A constant cough, headache or nausea or feeling ill only when at home or in certain areas. The persistent symptoms of allergies may indicate mold exists. The four groups that are most vulnerable to the effects of mold are:
    • Children
    • Senior citizens
    • Immunocompromised
    • Women who are pregnant
  5. A recent Flood Event. The spores need water to grow and, therefore, the recent flood, leak flood, or sewer back-up may have caused the necessary water activity required to support mold growth.
If you observe any of these signs, call now for a comprehensive mold inspection. The certification and comprehensive testing is offered. If you have an problem, professionals can find the issue and repair it.

Superior Mold Removal

Fast, reliable mold removal services for a cleaner home and a healthier family. Certified experts, advanced equipment, and professional results. Call today!

Phone: 1-888-217-6019

FEATURED
Professional mold removal firms are equipped with the equipment, staff, training and knowledge to tackle mold problems from the beginning to the ending. They can pinpoint your problem and then identify the right plan of action and start immediately. Professionally trained and certified technicians can complete the services required to make your home safe to your family again. Professional mold removal services typically consist of:

Water:

  • Water Damage Restoration
  • Water Extraction
  • Flood Damage Repair
  • Dehumidification

Mold:

  • Certified Mold Inspections
  • Mold Damage Remediation
  • Air Quality Testing

Areas of Service:

Mold remediation services are usually offered in various locations, including but not limited only to location, its surrounding areas, and the region beyond.

Contact Mold Removal Experts 24/7

Contact us, and help will be provided immediately! 1-888-217-6019

Proudly Serving location

A complete assortment of services comprising water damage restoration, inspection, and mold removal is readily available. Contact us today for a comprehensive mold inspection in your home or business. An indoor Environmental Professional (IEP) will determine the nature and degree of pollution in your property and help restore it to the healthy condition.

Typical 10 Step Process to Remove Mold

  1. Find the source. Determine the origin of the water intrusion. This must be pinpointed and remedied in order to prevent the water intrusion occurring again. repeating itself.
  2. A visible inspection of the Inspection of the Damage. Expert technicians inspect for obvious microbe growth and look in places that might be overlooked.
  3. Diagnostic Testing. Specialized equipment can "sniff out" invisibly mold and other mold that may be hiding behind walls, on stud framing and drywall. Its mold testing instruments ensure thorough testing for. When necessary, air sample tests are conducted by a certified mold assessor or Indoor Environmental Professional (IEP). The IEP takes samples and test every suspected room. All mold isn't the same, and the right tests will be able to distinguish deadly mold from just nuisance mold.
  4. Establish Containment. Protecting the household and the remainder of the home in the home from airborne mold spores by establishing containment. This establishes an safe area to allow removal work to begin. The kind of containment that is used will differ according to the zone of contamination:
    • Source: small areas of contamination less than 10 sq. ft. Bagged and removed.
    • Local: an area that can be closed off and remedied, usually 10 sq. ft. to 100 sq. ft.
    • Full Containment: areas which require an interim containment barrier in order to prevent cross-contamination. Used to seal off an entire room or several rooms.
  5. Air Filtration. Installation of portable air filtration units to cleanse the air and enhance air quality in the home. The protection of the family from pathogens that are transmitted by air is achieved through the establishment of negative air pressures between the air-contaminated zone and the rest of the home.
  6. Get rid of the Mold. Behind safety barriers, the technicians start to remove materials that are impacted by mold. This may include drywall, baseboards and cabinets, sinks or counters, and flooring in the kitchen. Removal of drywall from ceilings or insulation may be necessary if there was a roof leak occurred. It could require removing tubs or fixtures in the bathroom if it has been able to penetrate the walls due to leaking pipes. Professionally trained technicians take great care in conserving what can be kept while also ensuring removal of all evidence of mold.
  7. Mold Treatment. Once damaged materials are removed, professional-grade treatment and removal tools are employed, following IICRC guidelines. The remaining surfaces are cleaned and treated.
  8. Air Purification. After removal and treatment has been complete, air purification is performed for a number of days.
  9. Post-Remediation Air Sample Testing. Once the air purification process is completed, after the post-remediation air sample testing is conducted and must be awarded an acceptable grade by the IEP.
  10. Equipment Removal. When the post-remediation testing is finished and air tests are deemed acceptable by an certified mold assessor or IEP, containment barriers and equipment is removed. This provides a clean canvas for bringing in contractors to repair walls or flooring or renovate the kitchen or bathroom as needed.

What to look for when hiring an Mold Remediation Company

  • The Right Price Reputable mold removal companies will never charge for more work than needed. They carefully inspect homes and suggest the works necessary to restore the home to a healthy state. Be wary of businesses that may overcharge you or bill you for pad costs.
  • The Right Ethics Look for well-respected companies in the location and nearby areas. They should offer fair prices and only recommend work that is necessary for you to restore your home and ensure the safety of your family. Companies that are reputable stand behind their work with 100%.
  • The Right Time NOW! When you have mold and you're concerned about it, you'll want to get rid of it quickly. Contact someone to begin the drying process and determine the root of the issue, and begin testing to find out the best way to fix the problem.
  • The Best Practices Ensure that the mold removal company utilizes safe practices to protect your family. For example, appropriate methods such as HEPA vacuuming for dust/spore control are always preferable over misting, which can introduce more moisture into the space.
  • The right credentials Find technicians certified in WRT (Water Restoration Technician), ASD (Applied Structural Drying), and AMRT (Applied Microbial Remediation Technician).
  • The Right Team Professional teams operate to the highest standards every day. From the beginning of the phone call up to the post-remediation inspection, they should treat every client as family and every home like it is their own.
 

We're Here To Help!

Phone us now: 1-888-217-6019

 
Updated February 18, 2025