Mold Removal in Shiprock, NM New Mexico 87420

Do you require the help of a Licensed Mold Removal Company ASAP?

Call 1-888-217-6019 now.

Expert help is just one phone call away.

Simple Signs That You Could have a Mold Issue

  1. Moldy Smell. It's a unique smell. Even if you can't see anything, you still know it's there.
  2. Visual Microbial Growth. Dark splotches on the walls, ceiling floors or baseboards. Splotches in the ceiling may be a sign of a leaky roof or a burst pipe or condensation in ductwork. Dark patches or the appearance of brown or black mold on the walls may be a sign of cracks or burst pipe that is hidden behind the wall. This may be a slow leak, but the damage can only get worse.
  3. Soft Moist Spots on the floors, walls or Ceiling. This may suggest that the microbial growth may be present. Mold may not be visible at this point, but it could be hidden behind the drywall or on the support studs, underneath the flooring, or in the roof of your home.
  4. Sudden Unexplained illness. The constant headaches, coughing and nausea or feeling sick only you are at home or in certain areas. The persistent symptoms of allergies could indicate that mold is present. The four groups that are most vulnerable to the effects of mold are:
    • Children
    • Older people
    • Immunocompromised
    • Pregnant Women
  5. Recently water Event. The spores require water to grow, so an earlier water leak or flood, or sewer back-up could have triggered the proper water activity needed for support mold growth.
If you notice any of these symptoms, call now for a comprehensive mold inspection. The certification and comprehensive testing is readily available. If there's any problem, professionals can find the issue and repair it.

Superior Mold Removal

Fast, reliable mold removal services for a cleaner home and a healthier family. Certified experts, advanced equipment, and professional results. Call today!

Phone: 1-888-217-6019

FEATURED
Professional mold removal companies have the equipment, staff and the necessary education and knowledge to tackle mold problems from beginning to ending. They will pinpoint your problem and then determine the most appropriate plan of course of action and start right away. Trained and certified technicians can complete the services required to make your home safe to your family again. Professional mold removal services typically comprise:

Water:

  • Restoration of Water Damage
  • Water Extraction
  • Flood Damage Repair
  • Dehumidification

Mold:

  • Certified Mold Inspections
  • Mold Damage Remediation
  • Air Quality Testing

Areas Served:

Mold removal services are usually accessible in different locations, which includes but not limited only to location and its surrounding areas, and the region beyond.

Contact Experts in Mold Removal 24/7

Contact us immediately for assistance! 1-888-217-6019

Proudly Serving location

A complete range of services comprising water damage restoration, inspection, and mold removal is readily available. Call today for an comprehensive mold inspection in your home or business. A Indoor Environmental Professional (IEP) will evaluate the type and extent of the contamination in your property and assist you to restore it to a healthy condition.

Typical 10 Step Process for Mold Remediation

  1. Find the Source. Locate the root of the water intrusion. The source must be identified and rectified in order to prevent the water intrusion occurring again. occurring again.
  2. A visible inspection of the The Water Damage. Expert technicians inspect for visible microbial growth, looking in areas that could be missed.
  3. Diagnostic Testing. Specialized equipment can "sniff out" invisible mold and other mold that may be hiding behind walls, on stud framing and drywall. Its mold testing instruments ensure thorough testing for. When necessary, air sample tests can be taken by an certified mold assessor or Indoor Environmental Professional (IEP). The IEP will take samples and examines every room suspected of having mold. Every mold isn't the same, and the appropriate tests will be able to distinguish deadly mold from nuisance mold.
  4. Establish Containment. Protection of the household and the remainder of the home against the airborne mold spores by establishing containment. This creates a safe boundary for removal work to begin. The type of containment used will vary in accordance with the area of contamination:
    • Source: small areas of contamination smaller then 10 square. ft. Bagged and removed.
    • Local: an area that can be sealed off and remedied, usually 10 sq. feet. to 100 sq. ft.
    • Full-Containment areas where there is a need for a temporary containment barriers to prevent cross-contamination. The barrier is used to isolate the whole room or several rooms.
  5. Air Filtration. The installation of small portable air filtration units to purify the air and enhance air quality in the home. In order to protect the family from pathogens that are transmitted by air is achieved through the establishment of negative air tension between the air-contaminated zone and the remainder of the home.
  6. Get rid of the Mold. Behind safety barriers, technicians are able to remove materials impacted by mold. This may include baseboards, drywall as well as cabinets, sinks or counters, and flooring in a kitchen. Removal of drywall covering ceilings or insulation may be necessary if there was a roof leak occurred. It may include removing bathtubs or fixtures in the bathroom, if it has entered the walls because of leaky pipes. Skilled technicians take great care in keeping what is saved while ensuring removal of all evidence of mold.
  7. Treatment for Mold. After damaged materials have been removed professional-grade treatment and removal products are used, following IICRC guidelines. The rest of the surfaces are cleaned and treated.
  8. Air Purification. After removal and treatment has been complete, air purification is performed for several days.
  9. Post-Remediation Air Sample Testing. Once the air purification process is complete, post-remediation air sample testing takes place. carried out and must be awarded an acceptable grade through the IEP.
  10. Equipment Removal. Once the post-remediation testing is finished and air samples are deemed acceptable by a certified mold assessor or IEP, containment barriers and equipment is removed. This provides a clean canvas to bring in contractors to install the walls or flooring or redesign the kitchen or bath as needed.

What to Look for When Hiring an Mold Remediation Company

  • The Right Price A reputable mold removal companies will never be charged for work that is not needed. They will carefully examine homes and recommend work necessary to return the home to the healthy condition. Be wary of firms that could overcharge you or charge pad fees.
  • The Right Ethics Look for well-respected companies in location and the surrounding areas. They should have fair rates and only recommend work that is necessary for you to restore your home and ensure your family's safety. Trustworthy companies guarantee their work completely.
  • The Right Time NOW! When you have mold and you're concerned about it, you'll want to get rid of it immediately. Contact someone to begin the drying process and identify the cause, and begin testing to find out the best way to fix the problem.
  • The right practices Be sure the mold removal company utilizes safe methods to protect your family. For example, proper techniques like HEPA vacuuming for dust/spore control are superior to misting, which could introduce more moisture into the space.
  • The right credentials Find professionals certified in the areas of WRT (Water Restoration Technician), ASD (Applied Structural Drying), and AMRT (Applied Microbial Remediation Technician).
  • The Right Team Professional teams adhere in accordance with the highest standards at all times. From the beginning of the phone call to the post-remediation inspection, they should treat every customer like family and every home as if it was their home.
 

We're Here To Help!

Phone us now: 1-888-217-6019

 
Updated February 18, 2025