Mold Removal in Excelsior, MN Minnesota 55331

Do you require the help of a Licensed Mold Removal Company ASAP?

Call 1-888-217-6019 now.

Expert assistance is just a call away.

Simple Indicators That You Might have a Mold Issue

  1. Moldy Smell. It's a unique smell. Even if it's impossible to discern anything, you know that it's there.
  2. Visible Microbial Growth. Dark splotches on the walls, ceiling flooring, or baseboards. Splotches in the ceiling may suggest a leaky roof or a burst pipe or condensation in the ductwork. Dark spots or brown or black mold in the walls may indicate a cracked or burst pipe in the drywall. It may be an incipient leak, but the damage can only get worse.
  3. Soft moist areas on the Floors, Walls or Ceiling. This may suggest that microbial growth may be present. The mold may appear invisible right now, but it could be hiding behind the drywall, on the support studs, underneath the flooring or in the attic of your home.
  4. Sudden Unexplained health issue. Nagging coughing, headaches, nausea or being sick only at home or in certain spaces. These symptoms that persist may indicate mold may be present. The 4 groups most susceptible to illnesses caused by mold include:
    • Children
    • Senior citizens
    • Immune Deficient
    • Pregnant Women
  5. Recently Flood Event. The spores require water to grow, so an earlier flood, leak flood, or sewer back-up may have caused the necessary water activity in order to support mold growth.
If you observe any of these symptoms, call now for a comprehensive mold inspection. The certification and comprehensive testing is available. If you have a problem, professionals can find the issue and solve it.

Superior Mold Removal

Fast, reliable mold removal services for a cleaner home and a healthier family. Certified experts, advanced equipment, and professional results. Call today!

Phone: 1-888-217-6019

FEATURED
Professional mold removal firms are equipped with the equipment, personnel, and the training and knowledge to tackle mold problems from beginning to ending. They can pinpoint your problem, identify the best plan of actions and begin the process immediately. Professionally trained and certified technicians are able to provide the services necessary to make your home safe and secure for your family again. Professional mold removal services typically consist of:

Water:

  • Water Damage Restoration
  • Water Extraction
  • Flood Damage Repair
  • Dehumidification

Mold:

  • Certified Mold Inspections
  • Mold Damage Remediation
  • Air Quality Testing

Areas served:

Mold remediation services are typically available in many locations, including but not limited to the location, its immediate areas, and the region beyond.

Contact Experts in Mold Removal 24/7

Contact us, and help will be provided immediately! 1-888-217-6019

Proudly Serving location

A complete assortment of services that include water damage restoration, inspection, and mold removal is offered. Call today to schedule an comprehensive mold inspection in your home or business. An Indoor Environmental Professional (IEP) will assess the kind and level of contamination in your property and help restore it to an healthy state.

A Typical 10 Step Procedure for removing mold

  1. Find the source. Find out the source of the water intrusion. This must be pinpointed and rectified to prevent the water intrusion to from happening again.
  2. A visible inspection of the Water Damage. Expert technicians examine for visible Microbial growth and look in places that may be overlooked.
  3. Diagnostic Testing. The equipment is specially designed to "sniff out" invisibly mold which may be lurking in the walls, on stud framing and drywall. Its mold testing instruments ensure thorough testing for. If necessary, air sample tests can be taken by an certified mold assessor or Indoor Environmental Professional (IEP). The IEP will take samples and test every suspected room. Every mold isn't the exact same and the appropriate tests will be able to distinguish deadly mold from just nuisance mold.
  4. Establish Containment. Protection of the family and the rest of the home against the airborne mold spores by establishing containment. This creates an safe border for removal of the mold to start. The type of containment that is used will differ depending on the zone of contamination:
    • Source: small areas of contamination smaller then 10 square. ft. Bagged and removed.
    • Local: an area that can be sealed off and cleaned, typically 10 sq. feet. up to 100 sq. ft.
    • Full-Containment areas that require the use of a temporary containment barrier for temporary containment to prevent cross-contamination. Used to seal off the entire area or several rooms.
  5. Air Filtration. Installation of small portable air filtration units to cleanse the air and improve air quality in the home. The protection of the family from pathogens that are transmitted by air can be achieved by creating negative air tension between the affected area and the rest of the home.
  6. Take out the Mold. Behind safety barriers, technicians are able to remove materials that are impacted by mold. This may include drywall, baseboards and cabinets, sinks or counters, and flooring in a kitchen. The removal of drywall covering ceilings or insulation may be necessary in the event of the roof leak was involved. It could require removing bathtubs or fixtures in the bathroom if the water has been able to penetrate the walls because of leaky pipes. Skilled technicians take great care in conserving what can be preserved while taking care to ensure removal of all evidence of mold.
  7. Treatment for Mold. Once damaged materials have been removed professional-grade treatment and removal products are employed, following IICRC guidelines. The remaining surfaces are cleaned and treated.
  8. Air Purification. After removal and treatment has been completed, air purification is performed for a number of days.
  9. Post-Remediation Air Sample Testing. After the air purification protocol is complete, following remediation air sample testing is conducted and is given a passing grade through the IEP.
  10. Equipment Removal. Once the post-remediation testing is complete and air tests are considered acceptable by an certified mold assessor or IEP, containment barriers and equipment are removed. This provides a clean canvas to bring in contractors to repair the walls or flooring or remodel the kitchen or bathroom as required.

What to Look for When Finding an Mold Remediation Company

  • The Right Price Trustworthy mold removal companies will not cost more than needed. They will carefully examine homes and suggest work necessary to restore the home to the healthy condition. Be wary of businesses that may overcharge you or bill you for pad costs.
  • The Right Ethics Look for well-respected companies in the location and the surrounding areas. They should have fair rates and only suggest work that is necessary to restore your home and ensure your family's safety. Trustworthy companies guarantee their work completely.
  • The Right Time NOW! If you notice mold and you're concerned about it, you'll want to get rid of it quickly. Contact someone to begin the drying process and pinpoint the source, and begin testing to determine how to fix the problem.
  • The right practices Be sure the mold removal company uses safe procedures to protect your family. For example, proper techniques like HEPA vacuuming for dust/spore control are always preferable over misting, which could introduce more moisture into the zone.
  • The right credentials Seek out technicians certified in WRT (Water Restoration Technician), ASD (Applied Structural Drying), and AMRT (Applied Microbial Remediation Technician).
  • The Right Team Professional teams adhere in accordance with the most stringent standards throughout the day. From the initial phone call until the post-remediation inspection the team should treat every customer like family and each home like it were their own.
 

We're Here To Help!

Phone us now: 1-888-217-6019

 
Updated February 18, 2025